We are currently updating the articles for 1.09.0. Translated articles will need to be updated by their respective authors.

Difference between revisions of "Dedicated Server Setup"

From No More Room in Hell
Jump to: navigation, search
(→‎Connectivity)
m (→‎Windows)
 
(50 intermediate revisions by 6 users not shown)
Line 1: Line 1:
 
== Overview ==
 
== Overview ==
−
This article covers the bare minimum for server setup. Additional guides are recommmended!
+
This article covers the bare minimum for server setup. Additional guides are recommended!
 +
 
 +
 
 +
''What is a "listen" server?''
 +
 
 +
A listen server is run through the game's software, it's functionality that's built in.
 +
 
 +
This is ideal if you need to host a temporary server for friends to join within your city or province/state.
 +
 
 +
''Jump to the article:'' [[Listen_Server_Setup]]
 +
 
 +
 
 +
''What is a "dedicated" server?''
 +
 
 +
A dedicated server is technicaly a server that is availiable all the time, day or night, 24/7, 365. To do this it has a dedicated machine to use.
 +
 
 +
Special hardware should be used to run a dedicated server the right way. However, since it's just another piece of software you could use a spare computer.
 +
 
 +
''Jump to the article:'' [[Dedicated_Server_Setup]]
 +
 
 
== Connectivity ==
 
== Connectivity ==
 
{{Note|This article details port forwarding in a basic manor. If you’re familiar, you can skip it.}}
 
{{Note|This article details port forwarding in a basic manor. If you’re familiar, you can skip it.}}
Line 27: Line 46:
 
==Setting up a Dedicated Server==
 
==Setting up a Dedicated Server==
 
Dedicated servers are preferred if you want to ensure you get the best performance and flexibility. Most of the time, it's installed on a separate machine/computer where both it and the server are made available 24/7 (hence the term dedicated).
 
Dedicated servers are preferred if you want to ensure you get the best performance and flexibility. Most of the time, it's installed on a separate machine/computer where both it and the server are made available 24/7 (hence the term dedicated).
 +
 +
{{Note|You cannot use a steam account in SteamCMD and the Steam Client concurrently. You should register a separate account for the exclusive use with SteamCMD.}}
  
 
===Windows===
 
===Windows===
 
''This section will outline setup and administration for the latest generation of Windows. Versions Server 2003, XP and lesser will not directly follow these steps.''
 
''This section will outline setup and administration for the latest generation of Windows. Versions Server 2003, XP and lesser will not directly follow these steps.''
 +
 +
You will require the core SteamCMD files. You can find them here: https://steamcdn-a.akamaihd.net/client/installer/steamcmd.zip
 +
 +
Extract the files to a directory other then the steam client. Now open a command prompt to that directory and run steamcmd.
 +
 +
{{Warn|Windows might give you an "Error: Steam needs to be online to update. Please confirm your network connection and try again." or "Error: Download failed: http error 0" error if Internet Explorer is being anal.}}
 +
:::
 +
::: This is usually fixed by checking "Automatically detect settings" in IE (Internet Explorer) through the lan settings in the Internet option menu.
 +
::: 1. Open Internet Explorer (IE)
 +
::: 2. Click on Tools > Internet Options
 +
::: 3. Click on the "Connections Tab"
 +
::: 4. At the Bottom, you should see "Local Area Network (LAN) Settings".
 +
::: 5. Check the first box "Automatically detect settings"
 +
::: 6. Hit OK, and apply. Try running the SteamCMD again, if it still doesn't work. try lowering your "Internet Security level zone" to medium or lower. You can find that in the "Security" tab in "Internet Options".
 +
 +
 +
SteamCMD will update if required each time it executed. Now to download the NMRiH dedicated server software,
 +
Type the following into SteamCMD and hit enter after each line. (be mindful of the spaces)
 +
 +
: login anonymous
 +
:
 +
: force_install_dir .\nmrih_ds\
 +
:
 +
: app_update 317670
 +
 +
Now you should be able to navigate to the srcds.exe file and use: srcds.exe -console -game nmrih -insecure +map nmo_chinatown
 +
 +
====Windows - Persistent Dedicated Server Login====
 +
The following command can be used to provide your dedicated server with a persistent login, which allows users to "favorite" your server as it uses a registered domain name's DNS entry to find your server.
 +
 +
sv_setsteamaccount
 +
 +
The following steps will need to be taken:
 +
::: 1. Go to Steam website: https://steamcommunity.com/dev/managegameservers and login to your steam account.
 +
::: 2. Fill the '''App ID''' field with the ID of the base game ('''224260''' for NMRiH) and the '''Memo''' field with a text to keep track of what token belongs to what game ('''nmrihserver''' for example, remember that each server should have its unique token), then press '''Create'''.
 +
::: 3. Copy the '''Login Token''', then open autoexec.cfg in you nmrih cfg folder and add 'sv_setsteamaccout XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' without quotes. Save the file.
 +
::: 4. Start your server.
 +
::: 5. Server console now shows: Assigned persistent gameserver Steam ID [G:1xxx].
 +
Alternatively you can add '''+sv_setsteamaccount XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX''' to your command line when running the server via srcds.
 +
 +
For a more in-depth information of what the Game Server Login Token (GSLT) is and does visit [https://docs.linuxgsm.com/steamcmd/gslt#what-is-gslt LinuxGSM - What is GSLT?] and [https://support.steampowered.com/kb_article.php?ref=7791-UAFZ-3767&l=english Steam Support - CS:GO GSLT Bans]
  
 
===Linux===
 
===Linux===
−
''This section will outline setup and administration for common distos of Linux. Additional dependencies maybe required on your system. Consult your disto's documentation/support if you are unsure.''
 
  
−
===ReactOS===
+
No More Room in Hell server is available on Linux. These are brief instructions on how to install and start a server.
−
''While this operating system is in alpha stage, some steps maybe affected as the OS goes through gradual builds.''
+
 
 +
For further assistance take a look at the Server Hosting Forum.
 +
http://www.nomoreroominhell.com/forums/index.php?showforum=70
 +
 
 +
====Installation====
 +
 
 +
Create a username for your server.
 +
{{Warn|For security best practice do not run your server a root.}}
 +
<pre>adduser nmrihserver</pre>
 +
Chose a directory to install the server.
 +
<pre>cd /home/nmrihserver</pre>
 +
Create a directory for steamCMD.
 +
<pre>mkdir steamcmd
 +
cd steamcmd</pre>
 +
Download SteamCMD.
 +
<pre>wget http://media.steampowered.com/client/steamcmd_linux.tar.gz</pre>
 +
Extract steamCMD.
 +
<pre>tar -xvzf steamcmd_linux.tar.gz</pre>
 +
Create a directory for the server files,
 +
<pre>mkdir /home/nmrihserver/serverfiles</pre>
 +
Run the following command to download the server.
 +
You will need a Steam username and password to authenticate with steamCMD.
 +
{{Warn| For security reasons it is recommended that you create a new Steam username just for the server.}}
 +
<pre>./steamcmd.sh +login username password +force_install_dir "/home/nmrihserver/serverfiles" +app_update 317670 validate +quit</pre>
 +
 
 +
====64-Bit Distros====
 +
The No More Room in Hell server requires 32-bit library's to run.
 +
You are required to install extra packages to run this server.
  
−
==Setting up a Listen Server==
+
'''Ubuntu 64-Bit'''
−
Listen servers are the best option if you just want to play with your friends. This does not require a separate computer and is the easiest to use.
+
<pre>sudo apt-get install lib32gcc1</pre>
 +
'''Debian 64-Bit'''
 +
<pre>dpkg --add-architecture i386</pre>
 +
<pre>apt-get update && apt-get install lib32gcc1</pre>
 +
'''CentOS 64-Bit'''
 +
<pre>yum install glibc.i686 libstdc++.i686</pre>
 +
'''Other Distros'''
  
 +
Other 64-bit distros will have similar requirements to this. It is recommended that you seek out documentation or forums posts regarding 32-bit libraries.
  
−
First we must enable the developer console. This developer feature will assist you in customizing the server. You can find this in the options menu for No More Room in Hell. While in the keyboard tab, click the advanced button. Now check the box marked as "Enable developer console".
+
====Starting the server====
  
−
Back at the main menu, click create server and choose your desired options, then start the server.
+
to run the server use the following command.
  
−
Many players report "freezing" or NMRiH not responding after starting the server - this is perfectly normal. Let is take it's cource, in some cases you could wait upto 10 minutes for it to finish. After it has finished loading, you will have to set sv_lan to 0 in order for your friends to connect. You can do this by opening the console with the ~ key, then typing in ''sv_lan 0'' and pressing enter. You can now close the developer console.
+
<pre>./srcds_run -game nmrih +map nmo_broadway -maxplayers 8 -autoupdate</pre>
  
 +
There are various command line parameters available for the server.
 +
A complete list of parameters are available from the Valve Wiki.
  
−
If you server is not listed in the server browser, your friend will have to do some work with the developer console.
+
https://developer.valvesoftware.com/wiki/Command_Line_Options#Source_Dedicated_Server
−
They can use this command in the console to connect: ''connect XXX.XXX.XX.XXX''. ''Where XXX.XXX.XX.XXX is '''your''' public IP address.''
+
  
−
You should be done now, so go ahead and enjoy your very own listen server!
+
====GLIBC_2.15 error====
 +
No More Room in Hell requires ''GLIBC_2.15'' or above to run.
 +
If your distro does not meet this requirement you may get the following error.
 +
<pre>./srcds_nmrih: /lib/i386-linux-gnu/i686/cmov/libm.so.6: version `GLIBC_2.15' not found</pre>
 +
To fix this download the following file to the directory with ''srcds_nmrih'' included within it.
 +
<pre>wget https://github.com/dgibbs64/linuxgameservers/raw/master/NoMoreRoomInHell/dependencies/libm.so.6</pre>
 +
srcds_nmrih will use this updated version of libm.so.6 instead of the OS version.
 +
This problem commonly effects distros with a long life cycle such as RHEL and CentOS.
  
 
==Server Commands==
 
==Server Commands==
Line 74: Line 177:
 
|-
 
|-
 
| map
 
| map
−
| Force the server to change the map to another. Used to reload configuaration as it kicks all clients (Server Shutting Down).
+
| Force the server to change the map to another. Used to reload configuration as it kicks all clients (Server Shutting Down).
 
| map nms_northway
 
| map nms_northway
 
|-
 
|-

Latest revision as of 11:46, 9 December 2018

Overview

This article covers the bare minimum for server setup. Additional guides are recommended!


What is a "listen" server?

A listen server is run through the game's software, it's functionality that's built in.

This is ideal if you need to host a temporary server for friends to join within your city or province/state.

Jump to the article: Listen_Server_Setup


What is a "dedicated" server?

A dedicated server is technicaly a server that is availiable all the time, day or night, 24/7, 365. To do this it has a dedicated machine to use.

Special hardware should be used to run a dedicated server the right way. However, since it's just another piece of software you could use a spare computer.

Jump to the article: Dedicated_Server_Setup

Connectivity

Note:This article details port forwarding in a basic manor. If you’re familiar, you can skip it.


To get things started, we should talk about what these "external" and "internal" IP addresses are, and how they affect you.

You will probably have a DHCP server in your house/apartment. Most of the time this will be your router, but in some cases it could be something else. DHCP is a system that allows the router (or other device) to pass out internal IP addresses to other devices (such as your computer, laptop or tablet) that connect to it. Inside your network, all the devices talk to each other by using these internal addresses. Only devices inside your network can talk to others with these addresses - as they are reserved for use in LAN networks.


Note:You can tell a LAN network ip from a public one as LAN IPs tend to start with 192.168


If your friend wanted to connect to your NMRiH server, they may see it having the ip 192.168.1.2. This is what you see too, but your friend will scream and kick at not being able to connect. Just like you, your friend will be using these internal addresses as well. The problem here is that they correspond to computers/devices on their network, so when they try to connect, their router will only search on their network for a device that has the 192.168.1.2 address. In order to solve this problem, this is where external ip addresses come in.

Your router is assigned a public (external) IP address by your ISP's modem so it can communicate to computers around the word. This public address is also used when someone wants to give you data (websites, game servers, etc.). You can tell your router to pass on information it gets on a "port" to a computer inside the network. This is done by specifying the IP of the machine on the network, and what port to send it to. The common term for this is called "Port Forwarding", as it forwards the port(s) to another computer/device. This article won't go into detail about how to do that, but a great place to start is http://www.portforward.com, which will show you how to port forward.

To play on the server you only need to have 27015 (UDP) open/forwarded. The server doesn't use TCP traffic on this port for gameplay and thus is recommended that you do not forward it.


Note:While port forwarding is a quick and easy way to do this, it can be easily "messed up".


Now remember reading before about DHCP? It will come back to haunt you sadly. Since there is a limited amount of internal IP addresses, the router will try free up internal IP address for use. It will do this by removing unused addresses. These include computers/devices that are not on. So if you happen to turn the computer off that hosts the server and another device connects, it is likely to take that address your computer had and thus breaking the port forwarding you did. In order to prevent this from happening, you will have to set a static IP for the machine (technically the machine's ethernet interface).

That should now all be clear, you may be wondering where to get your external/public IP from. There are many sites that show you it - even Google "What is my IP address". After obtaining it, send it to your friends.


Now, many will argue at why you only need 27015 (UDP) open. Why not 27015 (TCP) with all those other ports as well? The remote console (RCON) for the server runs on 27015 (TCP) and can lead to security issues and Denial of Service attacks (DoS). You should only allow the TCP traffic in if you know what you're doing. Other ports shown in other guides are not needed, and thus don't need to be opened.

Setting up a Dedicated Server

Dedicated servers are preferred if you want to ensure you get the best performance and flexibility. Most of the time, it's installed on a separate machine/computer where both it and the server are made available 24/7 (hence the term dedicated).


Note:You cannot use a steam account in SteamCMD and the Steam Client concurrently. You should register a separate account for the exclusive use with SteamCMD.


Windows

This section will outline setup and administration for the latest generation of Windows. Versions Server 2003, XP and lesser will not directly follow these steps.

You will require the core SteamCMD files. You can find them here: https://steamcdn-a.akamaihd.net/client/installer/steamcmd.zip

Extract the files to a directory other then the steam client. Now open a command prompt to that directory and run steamcmd.


Warning! Windows might give you an "Error: Steam needs to be online to update. Please confirm your network connection and try again." or "Error: Download failed: http error 0" error if Internet Explorer is being anal.
This is usually fixed by checking "Automatically detect settings" in IE (Internet Explorer) through the lan settings in the Internet option menu.
1. Open Internet Explorer (IE)
2. Click on Tools > Internet Options
3. Click on the "Connections Tab"
4. At the Bottom, you should see "Local Area Network (LAN) Settings".
5. Check the first box "Automatically detect settings"
6. Hit OK, and apply. Try running the SteamCMD again, if it still doesn't work. try lowering your "Internet Security level zone" to medium or lower. You can find that in the "Security" tab in "Internet Options".


SteamCMD will update if required each time it executed. Now to download the NMRiH dedicated server software, Type the following into SteamCMD and hit enter after each line. (be mindful of the spaces)

login anonymous
force_install_dir .\nmrih_ds\
app_update 317670

Now you should be able to navigate to the srcds.exe file and use: srcds.exe -console -game nmrih -insecure +map nmo_chinatown

Windows - Persistent Dedicated Server Login

The following command can be used to provide your dedicated server with a persistent login, which allows users to "favorite" your server as it uses a registered domain name's DNS entry to find your server.

sv_setsteamaccount

The following steps will need to be taken:

1. Go to Steam website: https://steamcommunity.com/dev/managegameservers and login to your steam account.
2. Fill the App ID field with the ID of the base game (224260 for NMRiH) and the Memo field with a text to keep track of what token belongs to what game (nmrihserver for example, remember that each server should have its unique token), then press Create.
3. Copy the Login Token, then open autoexec.cfg in you nmrih cfg folder and add 'sv_setsteamaccout XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX' without quotes. Save the file.
4. Start your server.
5. Server console now shows: Assigned persistent gameserver Steam ID [G:1xxx].

Alternatively you can add +sv_setsteamaccount XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX to your command line when running the server via srcds.

For a more in-depth information of what the Game Server Login Token (GSLT) is and does visit LinuxGSM - What is GSLT? and Steam Support - CS:GO GSLT Bans

Linux

No More Room in Hell server is available on Linux. These are brief instructions on how to install and start a server.

For further assistance take a look at the Server Hosting Forum. http://www.nomoreroominhell.com/forums/index.php?showforum=70

Installation

Create a username for your server.

Warning! For security best practice do not run your server a root.
adduser nmrihserver

Chose a directory to install the server. 

cd /home/nmrihserver

Create a directory for steamCMD. 

mkdir steamcmd
cd steamcmd

Download SteamCMD. 

wget http://media.steampowered.com/client/steamcmd_linux.tar.gz

Extract steamCMD. 

tar -xvzf steamcmd_linux.tar.gz

Create a directory for the server files, 

mkdir /home/nmrihserver/serverfiles

Run the following command to download the server. You will need a Steam username and password to authenticate with steamCMD.

Warning! For security reasons it is recommended that you create a new Steam username just for the server.
./steamcmd.sh +login username password +force_install_dir "/home/nmrihserver/serverfiles" +app_update 317670 validate +quit

64-Bit Distros

The No More Room in Hell server requires 32-bit library's to run. You are required to install extra packages to run this server.

Ubuntu 64-Bit 

sudo apt-get install lib32gcc1

Debian 64-Bit 

dpkg --add-architecture i386
apt-get update && apt-get install lib32gcc1

CentOS 64-Bit 

yum install glibc.i686 libstdc++.i686

Other Distros

Other 64-bit distros will have similar requirements to this. It is recommended that you seek out documentation or forums posts regarding 32-bit libraries.

Starting the server

to run the server use the following command. 

./srcds_run -game nmrih +map nmo_broadway -maxplayers 8 -autoupdate

There are various command line parameters available for the server. A complete list of parameters are available from the Valve Wiki.

https://developer.valvesoftware.com/wiki/Command_Line_Options#Source_Dedicated_Server

GLIBC_2.15 error

No More Room in Hell requires GLIBC_2.15 or above to run. If your distro does not meet this requirement you may get the following error. 

./srcds_nmrih: /lib/i386-linux-gnu/i686/cmov/libm.so.6: version `GLIBC_2.15' not found

To fix this download the following file to the directory with srcds_nmrih included within it. 

wget https://github.com/dgibbs64/linuxgameservers/raw/master/NoMoreRoomInHell/dependencies/libm.so.6

srcds_nmrih will use this updated version of libm.so.6 instead of the OS version. This problem commonly effects distros with a long life cycle such as RHEL and CentOS.

Server Commands

You can use these commands on listen servers as well as dedicated servers. Enter the command/cvar you want to use, and the value (if it requires one).


sv_votekick_timer 10


While on a listen server, open the developer console with the ~ key.

Command/Cvar Description Example
changelevel Peacefuly change the map to another, and tell clients it's changing. changelevel nms_northway
map Force the server to change the map to another. Used to reload configuration as it kicks all clients (Server Shutting Down). map nms_northway
kick Kick a player right away. kick dark_st3alth
Retrieved from "https://wiki.nomoreroominhell.com/index.php?title=Dedicated_Server_Setup&oldid=1851"